Skip to main content
True Trade Path

Career guide

How to Become a Machinist

The full path from application to licensed journeyman — what it requires, how long it takes, what you earn while you train, and what it costs to start.

Time to journeyman
4 years for tool and die
Median pay
$50,840/yr
Tuition required
None via apprenticeship

Machinists set up and operate lathes, mills and CNC machining centers to produce parts within tolerances measured in thousandths of an inch. The trade splits between production operation and the far better-paid setup, programming and toolmaking work. Skill in CAM programming and GD&T interpretation is what separates operators from machinists.

Median annual pay
$50,840
$24.44 per hour
Projected growth
+2%
2023–2033 projections
Typical entry
4 years for tool and die
High school diploma or equivalent

The path, step by step

  1. Confirm the trade actually fits you

    Before anything else, test the assumption. Mostly standing, with moderate lifting of stock and fixtures. Indoors and climate-controlled compared with the building trades. Hearing and eye protection are constant requirements. Spend a day on a jobsite with someone ten years into the trade — not someone in year one — and ask what they would tell their younger self.

  2. Meet the baseline requirements

    Most programs require high school diploma or equivalent, an age of 18 or over, a valid driver's licence, and one year of high school algebra with a passing grade. Algebra is the most common blocker and the easiest to fix — one semester at a community college clears it.

  3. Choose your training route

    1–2 year machining program or a 4-year apprenticeship. A registered apprenticeship pays you from the first week and carries no tuition debt. A trade school program costs money up front but can shorten the time to a first job and is sometimes the only realistic route where apprenticeship slots are scarce.

  4. Apply — broadly, and more than once

    Apply to the union local, to non-union programs run by contractor associations, and directly to licensed contractors in the same cycle. Application windows are narrow and often annual. Competitive locals receive hundreds of applications for a handful of slots, so reapplying after improving your aptitude score is normal rather than a setback.

  5. Work the apprenticeship

    Expect 4 years for tool and die, combining paid on-the-job hours with classroom instruction. Apprentices typically start near 40–50% of journeyman scale with scheduled increases every six to twelve months, reaching 80–90% of scale by the final year.

  6. Get licensed and pick a specialization

    No license. NIMS credentials are the recognized skill standard. After licensing, pay diverges by specialization far more than by years served. The common paths are cnc setup and programming, tool and die making, mold making, swiss screw machining.

Run the numbers before you commit

An apprenticeship earns from week one and carries no tuition. The trade ROI calculator compares it against trade school and a four-year degree over ten years, including forgone wages and loan interest.

What it costs to start

Through a registered apprenticeship there is no tuition, but there are real first-year costs that catch people out.

Application and testing
Usually $25–$75 for the application and aptitude test, where charged at all.
Tools
A first-year machinist tool kit typically runs several hundred to a few thousand dollars depending on the trade and the tier you buy. Ask your local or employer for their required list before buying anything.
Boots and PPE
Budget $150–$300 for boots. Employers usually supply everything else beyond footwear.
Transportation
Reliable transportation is a practical requirement. Jobsites change and are rarely on a transit line.
Classroom
Related instruction is normally paid for by the program, though books and fees can run a few hundred dollars a year.
Price a first-year tool kitCheck your readiness

Before you decide

In your favor

  • Indoor, clean and climate-controlled relative to field trades
  • Programming and toolmaking skills pay well above the median
  • Strong reshoring demand in aerospace, defense and medical
  • Genuinely intellectually engaging work

Go in knowing

  • Entry-level machine operation pays poorly and is being automated
  • Shift work is common in production shops
  • Growth is flat at the occupational level
  • Advancement requires deliberate CAM and metrology learning

Common questions

How long does it take to become a machinist?
Typically 4 years for tool and die from starting an apprenticeship to reaching journeyman status. A trade school program first can shorten the time to your first paid position but does not usually shorten the total hours required for licensing.
Do you need a degree to become a machinist?
No. High school diploma or equivalent is the typical requirement. The trade is learned through paid on-the-job hours and classroom instruction, not a degree program.
How much do machinists make?
The national median is $50,840 per year, or about $24.44 per hour. The middle of the distribution runs from roughly $35,910 to $74,670, with specialization, licensing, region and business ownership driving most of that spread.
Do you get paid during a machinist apprenticeship?
Yes. Registered apprenticeships are employment, not schooling. You earn a wage from the first week, typically starting at 40–50% of journeyman scale and stepping up on a published schedule as you accumulate hours and classroom credits.
Is machinist a good career?
The projected employment change is +2% over 2023–2033 projections, with about 39,000 openings a year from growth and replacement combined. Whether it is good for you depends far more on the conditions than the numbers: entry-level machine operation pays poorly and is being automated.